Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Before
AfterSchlage Lock Installation & Rekey in Katy: What to Know First
We provide independent Schlage lock installation and rekey service in Katy, with most residential jobs completed same-day and commercial work scheduled within 24 hours. Rekeying a standard Schlage deadbolt or knob typically runs $29-$49 per cylinder, and full smart lock installation ranges $180-$340, with every price quoted in writing before we dispatch. This page is for Katy homeowners and property managers who need a Schlage product installed, rekeyed, or diagnosed correctly the first time. Call (832) 402-8386 for a firm price on your specific model.
How Schlage Products Fail - and How We Fix Them
- Schlage Encode and Sense smart locks lose Wi-Fi pairing after router updates. In Katy, where sudden thunderstorms and power flickers are common from April through October, we’ve found these locks drop connection more often than comparable Yale or Kwikset units. We factory-reset the lock, re-pair through the Schlage Home app, and if the issue repeats, we install a Z-Wave range extender or recommend hardwiring to a stable 2.4 GHz network.
- Schlage B60N deadbolts develop sticky cylinders after 4-6 years in Gulf Coast humidity. The nickel-bronze pins corrode faster here than in drier climates, causing key resistance or failure to turn. We pull the cylinder, clean with Houdini or similar non-residue lubricant, and if the pinning is pitted, we rekey to fresh brass pins rather than replace the entire lock.
- Schlage FE595 keypad levers suffer from membrane button failure. The rubber contact pad beneath the digits degrades with UV exposure, common on south-facing doors in Katy subdivisions like Cinco Ranch and Seven Meadows. We source the OEM membrane or install a quality aftermarket equivalent with UV-stable silicone, then reprogram the codes.
- Schlage AL-Series commercial levers sag or spin on the spindle. The zinc alloy chassis fatigues under heavy traffic in apartment common areas and retail entries. We diagnose whether the lever return spring or the chassis itself has failed; for the latter, we replace with a Schlage ND-Series upgrade (solid brass chassis) and rekey to the existing master key system.
- Schlage Connect BE469 Z-Wave locks drain batteries in 3-4 weeks. This is almost always a firmware handshake issue with SmartThings or Ring hubs, not the lock. We update the lock’s Z-Wave module, check for phantom automation triggers in the customer’s app, and if the hub is the problem, we document it so the customer can pursue warranty with the hub manufacturer.
Our Schlage Lock Installation & Rekey Process
- 1
Call and model identification. We ask for the Schlage model number (printed on the lock edge or in the app) and the symptom. This lets us pull the correct pinning kit, smart lock adapter, or chassis parts before we leave the shop.
- 2
Firm price per Haven Standard Clause 1. The dispatcher quotes the full price - no call-out surcharge, no “plus parts” ambiguity. The technician is contractually prohibited from changing it at your door.
- 3
On-site diagnosis and photo documentation. Our technician photographs the installed condition, tests all functions, and explains what was found. Name the part, name the price, describe what was found.
- 4
Parts decision: OEM or quality aftermarket. For Schlage mechanical locks, we stock factory cylinders and keyways. For discontinued smart lock components, we source tested aftermarket boards or recommend current-model replacement with honest comparison.
- 5
Installation or rekey with function testing. We cycle the lock 50 times, verify key operation from both sides, test all electronic features, and reset all codes to customer specifications.
- 6
Written record and 365-Day Done Right Promise. You receive a documented photo record, itemized invoice, and warranty card before we leave. If it’s not done right, we make it right.
BeforeAfterWhat Schlage Lock Installation & Rekey Costs in Katy
| Service | Typical Range | What Affects Price |
|---|---|---|
| Standard deadbolt/knob rekey | $29-$49 per cylinder | Number of cylinders, master keying, high-security pins |
| Schlage smart lock installation | $180-$340 | Door prep condition, Wi-Fi extender needed, existing deadbolt removal |
| Keypad lever repair (FE595/FE575) | $95-$165 | Membrane replacement vs. full electronics swap |
| Commercial lever upgrade (AL to ND) | $220-$380 per door | Chassis condition, master key system complexity |
| Emergency lockout - Schlage residential | $85-$145 | After-hours timing, smart lock bypass complexity |
These are the prices we quote on the phone. There is no additional trip charge. The price on the invoice matches the price you were given - Haven Standard Clause 1, in force since 2002. Call (832) 402-8386 for an exact quote on your Schlage model; estimates are free.
Why Katy Homeowners Call Novak Lock & Security Katy for Schlage Work
We’ve rekeyed Schlage locks in Katy since before LaCenterra at Cinco Ranch opened its first retail building. Daniel Novak and our technicians carry pinning kits for the full Schlage keyway family, including the restricted SC1 and Primus lines, and we stock Kwikset and Medeco cylinders for homes mixing brands across entry points. Every visit produces a documented photo record, every technician is background-checked and uniformed, and every job is backed by the 365-Day Done Right Promise. We are an independent Schlage service provider - not affiliated with or authorized by Schlage - which means we recommend what the hardware actually needs, not what a manufacturer program dictates.
FAQs
No. Rekeying a Schlage mechanical lock by a qualified locksmith does not void the residential limited lifetime warranty on the mechanical components. However, drilling the lock, using non-OEM replacement parts in smart locks, or improper installation can void coverage. We document our work with photos so any future warranty claim has a clear service history. Call (832) 402-8386 if you’re unsure about your specific model’s warranty status.
Schlage smart locks with physical key override (Encode, Connect, Sense) can be rekeyed like any deadbolt - the electronic components are separate from the cylinder. If the keypad or Wi-Fi module has failed but the mechanical portion is sound, rekeying preserves your existing keys while you decide on electronic replacement. We quote both options in writing so you can compare.
Most residential rekeys are completed same day, often within two hours of your call. Commercial master key systems and multi-unit properties in Katy are scheduled, not rushed, because accurate pinning takes precedence over speed. We quote a firm arrival window and call 15 minutes out.
Mechanical Schlage locks built before 2010 often have thicker brass castings and longer service life than newer zinc-alloy equivalents. If the chassis isn’t cracked and the bolt isn’t bent, rekeying or cylinder replacement is usually the better value. We show you the wear points and quote both paths before you decide.
We stock Schlage B-series deadbolts, FE-series keypad levers, common cylinders, and smart lock installation kits at our Katy-area shop. Discontinued items like original Connect BE469 touchscreens are sourced from verified aftermarket suppliers with same-week availability. We never quote a job we cannot complete promptly.
Written by Daniel Novak, Owner, Novak Lock & Security Katy at Novak Lock & Security Katy, serving Katy and nearby areas.