Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Access Control Systems Across Greatwood
Access control system repair and rekeying in Greatwood typically runs $180-$450 per entry point, with most HOA gate and amenity-center calls completed same-day once authorization is confirmed. We quote every job in writing before dispatching a technician, and that written price is locked under Haven Standard Clause 1.
We serve Greatwood’s gated sections and master-planned neighborhoods from our Houston office, with crews running the Grand Parkway corridor daily. Whether it’s a corroded keypad entry at the community pool off Greatwood Parkway or a master key system reset for your HOA management company, we carry the hardware and the documentation procedures this community’s architecture demands. Call us at (832) 402-8386 for a written estimate.
Why Novak Lock & Security Katy Is Greatwood’s Preferred Access Control Systems Company
We’ve worked Greatwood long enough to know the difference between a gate operator failure and an access control hardware failure. The call comes in saying “the gate is broken,” but what we find is a corroded lock cylinder or a keypad entry with contacts degraded by Fort Bend humidity. Our technicians carry replacement cylinders for Schlage, Medeco, and Mul-T-Lock on every van, so we’re not making a second trip.
Our Greatwood customers know the 365-Day Done Right Promise by experience, not by slogan. If a strike plate we installed binds six months later because the door frame keeps shifting, we come back and fix it. Every visit leaves a documented photo record with the customer, and every technician is background-checked and uniformed under The Haven Standard.
Calls are answered by a live person, 24/7. No voicemail queue. No callback window.
Dispatch to Greatwood is coordinated from our Houston office, with crews already in the Katy-Sugar Land corridor most days. Most non-emergency access control work is surveyed and scheduled within 48 hours; emergency lockouts on common doors or gates get same-day response when the management company authorizes entry.
Our Access Control Systems Services in Greatwood

Key Control and Master Key System Administration for HOA and Amenity-Center Common Doors
In Greatwood, the management company holds the key control authority, not the individual homeowner. We administer master key systems that let a single manager credential open pool gates, amenity-center doors, and maintenance sheds while restricting residents to their designated entry points. Our rekey work is documented with a bitting list delivered to the HOA board, not handed to whoever asks at the door. A typical master key system setup or rekey for a Greatwood amenity cluster runs $220-$380, quoted in writing before we start.

Keypad Entry and Smart Lock Service on Gated Entry Points
Greatwood’s gated sections rely on keypad entry systems that take a beating from Fort Bend County humidity and heat. We service standalone keypads, integrated proximity readers, and the mechanical lock cylinders that secure them. When a keypad entry starts rejecting valid codes, the problem is often corrosion on the backplane contacts or a lock cylinder that needs re-pinning to the community’s master key system. We stock replacement hardware for major brands and can often restore function without replacing the entire unit. Keypad entry service in Greatwood typically runs $150-$320.

Lock Cylinder Service and Rekey on Community-Standard Hardware
Greatwood’s subdivisions were built with builder-grade Kwikset and Schlage hardware that is now aging out simultaneously across entire neighborhoods. We rekey to existing master key systems, upgrade to high-security cylinders (locks that cannot be picked or bumped by standard tools) from Mul-T-Lock or Abloy, and replace failed cores on community-standard Baldwin or Sargent hardware. Every rekey includes a new key code registered to the management company’s key control log. Cylinder rekeying runs $45-$85 per core; high-security upgrades start at $120.

Non-Destructive Entry on Locked Common Doors and Gates
When a manager’s credential fails at a Greatwood amenity center or a gate controller locks out during a community event, we open without drilling. Non-destructive entry means picking, bypassing, or decoding the existing hardware to restore access, then diagnosing why the failure occurred. In Greatwood, that diagnosis almost always includes checking the strike plate alignment, especially on any door in a lower-lying section that took water during Hurricane Harvey. Non-destructive entry service runs $120-$200 in Greatwood.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Greatwood
We carry stock for the brands installed across Greatwood’s original build and subsequent upgrades: Schlage and Kwikset for the builder-grade base, Baldwin for the premium amenity-center upgrades, and Mul-T-Lock and Abloy for communities that have moved to high-security master key systems. Our vans are stocked with cylinders, keypad entry modules, and strike hardware so most Greatwood calls are completed in one visit. Factory-authorized work means your warranty stays intact and your key control documentation meets The Haven Standard.
Common Access Control Systems Problems We See in Greatwood Homes

- HOA gate controllers fail from corroded lock cylinders, not gate operator faults. Fort Bend humidity attacks the mechanical cylinder inside the keypad housing while the gate motor keeps running fine. The fix is access control hardware service, not an operator technician.
- Strike-plate misalignment on 1990s door frames throws new smart locks out of square. Greatwood’s wooden frames swell in summer and shrink in winter; a keypad entry or smart lock installed without checking lock-to-strike alignment will bind within weeks. We check it on every call.
- Harvey-warped frames in lower sections look straight but aren’t. Homes near the Brazos River corridor that took water in 2017 often have door frames that are no longer perfectly square. Replacing the lock without adjusting the strike plate guarantees a callback.
- Key control collapses when contractors cut keys outside the management company’s system. In a master-planned community, unlogged credentials for gate and common-door access create security gaps that only show up when someone who shouldn’t have a key, does.
Pricing for Access Control Systems in Greatwood, TX
| Service | Typical Range in Greatwood |
|---|---|
| Master key system rekey (HOA/amenity cluster) | $220-$380 |
| Keypad entry service/repair | $150-$320 |
| Lock cylinder rekey (per core) | $45-$85 |
| High-security cylinder upgrade (Mul-T-Lock, Abloy) | $120-$280 |
| Non-destructive entry (common door/gate) | $120-$200 |
| Strike plate adjustment or replacement | $65-$140 |
These are the ranges we quote on the phone for Greatwood access control work. The exact price depends on hardware grade, number of cylinders, and whether we find frame damage that needs correction. We do not add a call-out surcharge on arrival. The price you approve in writing before dispatch is the price on the invoice, per Haven Standard Clause 1. Free written estimates; free second opinion on any competitor’s quote.
We Also Serve Cities Near Greatwood

Our crews run the west Houston corridor daily, covering Access Control Systems in Greatwood plus Katy, Cinco Ranch, Brookshire, and Mission Bend. Same written-price policy, same documented photo record, same Haven Standard on every call.
Serving Greatwood, TX - Our Local Coverage Area
We’re based in the Greatwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Access Control Systems in Greatwood

The HOA or management company authorizes all access control work on common doors and gates in Greatwood. Individual homeowners cannot request rekeys or credential changes for community property, and our first question on any Greatwood access call is who holds that authority. If you’re a homeowner with a private residence issue, we handle that separately; for common-area work, we need management company sign-off before we quote. Call (832) 402-8386 and we’ll walk you through the authorization process.
The sticking is almost always strike-plate misalignment caused by seasonal frame movement, not a defective lock. Greatwood’s 1990s-2000s wooden door frames swell in Fort Bend’s humid summers and shrink in winter, throwing the deadbolt out of square. If your installer didn’t check lock-to-strike alignment and shim the strike plate accordingly, the bolt will bind. We correct this as standard practice on every Greatwood door we touch. Call (832) 402-8386 for an inspection - estimates are free.
Yes. We rekey gate cylinders, amenity-center deadbolts, and maintenance-shed hardware into a unified master key system with documented bitting lists delivered to the management company. The work is quoted in writing before we start, and every cylinder is tested against the manager’s credential before we leave. Typical master key rekeying for a Greatwood community cluster runs $220-$380. Call (832) 402-8386 to schedule a survey.
We stock Schlage and Kwikset cylinders and entry sets that match Greatwood’s original 1988-mid-2000s builder-grade hardware, plus upgrade options from Baldwin, Mul-T-Lock, and Abloy. Most replacements are completed in one visit without special-order delays. If your HOA requires community-standard finishes, we match them. Call (832) 402-8386 with your hardware description for a written quote.
Non-destructive entry means we open the lock without drilling or damaging the hardware, using picking, bypass, or decoding techniques. For Greatwood’s common doors and gates, this preserves the existing master key system and avoids the cost of full cylinder replacement. After entry, we diagnose why the failure occurred - usually corrosion, credential mismatch, or frame-related binding - and fix it. Non-destructive entry in Greatwood runs $120-$200, quoted in writing before we dispatch. Call (832) 402-8386 for immediate response.
Get a Written Estimate for Access Control Systems in Greatwood
Call (832) 402-8386 for a free, written estimate on any access control work in Greatwood. We’ll confirm authorization for common-area jobs, quote a firm price before dispatch, and send a background-checked, uniformed technician with a documented photo record of every step. The price on the phone is the price on the invoice. Haven Standard Clause 1, since 2002.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Greatwood under The Haven Standard since 2002.






