Abloy Lock Rekeying Nationwide | Novak Lock & Security Katy

Abloy Lock Rekeying: The Katy Owner’s Guide

Abloy lock rekeying in Katy typically runs $45-$85 per cylinder for residential deadbolts and knob sets, with high-security Abloy Protec2 cylinders at $95-$145, and we stock the pinning kits and key blanks for same-day service. Most rekeys are completed in 20-40 minutes on-site, with a written price confirmed before we dispatch. Katy homeowners usually discover an Abloy rekey is needed after a move, a lost key, or when a tenant or contractor never returned a copy - the cylinder still turns, but control of who can enter is gone.

Call (832) 402-8386

Which Abloy Models This Applies To

Abloy’s product line breaks into three tiers, and the rekeying approach differs for each. The Classic and Profile cylinders - common in older Katy commercial buildings and some 1990s-era residential installations - use a single-row disc mechanism with a fixed keyway. These can be rekeyed if the cylinder is removable and the key is present or the cylinder can be picked open without damage. The Protec and Protec2 lines, which we see in newer Cinco Ranch homes and in LaCenterra retail spaces, use a rotating disc system with a moving element in the key itself; rekeying requires a specific Abloy pinning kit matched to the cylinder generation.

To identify your model: check the face of the cylinder for “PROTEC” or “PROTEC2” stamped near the keyway, or look for a small Abloy logo with a series number on the lock housing. The Protec2 key has a distinctive dimple cut on both edges plus a small moving ball near the tip - if your key has this, you have Protec2 and need that specific kit. We carry both Protec and Protec2 pinning kits on our trucks, along with Schlage, Kwikset, and Medeco cylinders for mixed-brand properties.

OEM Abloy pinning kits are manufactured in Finland; aftermarket equivalents exist for Classic and Profile lines but we do not use them for Protec2 work, where tolerance is tight enough that a 0.05mm variance in disc depth causes key binding in Katy humidity. We are an independent service provider with no affiliation to Abloy; we source parts through authorized distributors and document the kit serial number on every invoice.

Signs Your Abloy Lock Rekeying Is Failing

• Key turns but doesn’t retract the bolt. The tailpiece connecting the cylinder to the locking mechanism has slipped or sheared. This is a mechanical failure, not a rekeying issue, but we diagnose it before any pinning work starts so you don’t pay for a rekey you don’t need.
• Key works in one lock but not a matching set. Someone rekeyed one cylinder and not the other, or a replacement cylinder was installed from a different key series. We see this in Katy townhomes where a previous owner replaced a single failed lock with whatever was in stock at the hardware store.
• Key is difficult to insert or remove. Discs inside the cylinder have worn unevenly, or debris has entered the keyway. Abloy’s disc system is more tolerant of dust than pin-tumbler locks, but the clay-heavy soil in Katy gets tracked in and can accumulate in the keyway over years.
• Former resident or employee still has a key. No physical symptom, but the security function is failed. Rekeying restores key control without replacing the hardware - faster and less expensive than full lock replacement when the cylinder is in good condition.
• Lock was rekeyed recently but the new key already sticks. Incorrect disc selection during the last rekey, or an aftermarket kit with poor tolerance. We document the disc stack we install and warranty the work for 365 days under our Done Right Promise.

Before

After

Replacement Cost & What’s Included

Abloy rekeying in Katy breaks down as follows:

The range reflects cylinder accessibility (a rim cylinder on a glass door takes longer than a standard deadbolt), key quantity (we include two keys; additional keys are $8-$12 each), and whether we need to source a rare key blank. Every price is quoted in writing before we leave for your location. Haven Standard Clause 1: the price on the phone is the price on the invoice. No call-out surcharge, no trip fee added at the door. Work includes the rekey, two keys, lubrication of the cylinder, and a documented photo record of the completed lock. The 365-Day Done Right Promise covers any binding, sticking, or key failure traceable to our work.

DIY or Call Us?

An owner can safely check three things: confirm the Abloy model from markings on the cylinder, verify whether a working key is present, and test whether the key operates smoothly in all installed cylinders. Beyond that, Abloy rekeying requires specialized tools - disc detainer picks for opening without a key, a pinning kit with discs sorted by depth, and a key machine capable of cutting Abloy’s angled dimple patterns. The disc system is not intuitive; discs must be stacked in precise order, and a single reversed disc renders the cylinder inoperable.

We do not recommend DIY rekeying on Abloy Protec2 cylinders. The moving element in the key requires calibration that is not documented in consumer literature, and a damaged cylinder means full replacement at $200-$400 rather than a $95 rekey. Name the part, name the price, describe what was found - that’s how we work, and it’s why we diagnose before quoting. For an exact price on your Abloy rekey in Katy, call (832) 402-8386. Estimates are free, and the price we state is the price you pay.

FAQs